QM INDUSTRIES QMTU26J500SEM Mounted Units & Inserts

d:150.000 mm; Basic Dynamic Radial Load Rating C:242000 N; Grease Speed Rating n1:2100 rpm; Oil Speed Rating n2:2700 rpm; Basic Static Radial Load Rating Co:280000 N; Fillet Radius rb:1.00 mm; D:270.0000 mm; B:45.00 mm; Fillet Radius ra:2.50 mm;

B1:42.9 mm; Housing material:Cast iron; Bearing:YSPAG 208; A:48 mm; J:135.5 mm; N4:4 mm; A1:30 mm; H1:49.2 mm; End cover:ECY 208; A5:23.5 mm;

Oil Speed Rating Open/Shielded n2:6000 rpm; Basic Dynamic Radial Load Rating C:99500 N; d:55.000 mm; D:140.0000 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:62000 N; Sealed Speed Rating n3:3400 rpm; Accessories:Shield & Seal; B:33.00 mm; Grease Speed Rating Open/Shielded n1:5000

C:192 mm; r1,2 min.:2.1 mm; Design variant/feature:BC4.1/WO; B:192 mm; F:246 mm; D:310 mm; D1 ≈:279.9 mm; Basic dynamic load rating C:1830 kN; Mass bearing:46.1 kg; s:3 mm;

Da max.:95.4 mm; Calculation factor f2C:1.12; ra max.:1 mm; d2:79.2 mm; a:27.9 mm; Attainable speed for grease lubrication:14000 r/min; D1:90.8 mm; Preload class A GA:200 N; Calculation factor f:1.19; Static axial stiffness, preload class C:348 N/µm;

d:85.000 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:174000 N; Basic Static Radial Load Rating Co:146000 N; Grease Speed Rating n1:8300 rpm; Fillet Radius ra:2.50 mm; B:41.00 mm; D:180.0000 mm; Oil Speed Rating n2:12000 rpm;

Oil Speed Rating n2:10000 rpm; D:80.0000 mm; Grease Speed Rating Open/Shielded n1:8500 rpm; d:35.000 mm; Sealed Speed Rating n3:6000 rpm; B:21.00 mm; Oil Speed Rating Open/Shielded n2:10000 rpm; Basic Static Radial Load Rating Co:19000 N; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:

Oil Speed Rating Open/Shielded n2:7500 rpm; Fillet Radius ra:1.00 mm; D:85.0000 mm; Basic Static Radial Load Rating Co:32500 N; d:45.000 mm; Accessories:Two Shields & Snap-R; B:19.00 mm; Basic Dynamic Radial Load Rating C:39300 N; Grease Speed Rating Open/Shielded n1:6200 rpm;

Static (Coa):102 kN; D:90 mm; r2s (min):0.6 mm; r1s (min):1.5 mm; rs (min):1.5 mm; B:23 mm; T:24.75 mm; a:21 mm; C:19 mm; d2:50 mm;

Recommended tightening torque for grub screw:6.5 N·m; Housing material:Stainless steel; End cover:ECW 208; Limiting speed:2800 r/min; Db1:96.5 mm; Hexagonal key size for grub screw N:3.969 mm; Recommended diameter for attachment bolts, inch G:0.5 in; A:38.9 mm; Basic dynamic load rating C:26

Fatigue load limit Pu:0.335 kN; T:38.8 mm; d:23.812 mm; Recommended tightening torque for grub screw:4 N·m; Recommended diameter for attachment bolts, inch G:0.375 in; N:12.3 mm; A:31 mm; Basic dynamic load rating C:14 kN; Limiting speed:7000 r/min; L:95 mm;

Design (sliding contact surface combination):Steel/steel, heavy-d; D:160 mm; C:55 mm; da min.:118 mm; dk:140 mm; M:5 mm; Basic static load rating C0:3250 kN; Basic dynamic load rating C:655 kN; r2 min.:1 mm; Da max.:153 mm;

Basic static load rating C0:5700 kN; ra max.:3 mm; d:380 mm; B:140 mm; Fatigue load limit Pu:500 kN; K:5 mm; Reference speed:500 r/min; da min.:398 mm; Da max.:502 mm; Calculation factor kr:0.25;

Oil Speed Rating Open/Shielded n2:15000 rpm; Basic Dynamic Radial Load Rating C:12500 N; Basic Static Radial Load Rating Co:8300 N; D:47.0000 mm; B:14.00 mm; Grease Speed Rating Open/Shielded n1:12000 rpm; d:20.000 mm; Accessories:Two Shields; Fillet Radius ra:1.00 mm;

Basic Radial Load Rating-Static SCO:116000 N; Speed Rating-Open and Shielded-Oil OSO:12600 rpm; Speed Rating-Open and Shielded-Grease OSG:8700 rpm; Type:200-RDM Series (from; D:160.0000 mm; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; Basic Radial Load Rating-Dynamic DC:130000 N; B:30.00 mm;